Anchors and Roof Brackets

Anchors and Roof Brackets

SKU: V8221111
 

  • A complete fall arrest system requires three primary components: approved full body harness, connector and anchorage connector
  • Anchors can be connected to a variety of materials such as steel, wood and concrete
  • PeakWorks offers a wide range of anchor systems including: single-use/reusable roof anchors, sliding beam anchors, concrete hole anchors and permanent anchors
  • The anchor should be located directly above the worker to prevent swinging
  • The height of an anchor is a key variable when determining fall clearance
  • As with all fall protection products, anchors must be inspected by a competent person at a minimum annually
  • All PeakWorks anchors are built with a minimum tensile strength of 5,000 lb (22 kN)
  • All PeakWorks anchors meet or exceed CSA Z259.15 and ANSI Z359.18 standards and OSHA requirements
  • 310-lb (141-kg) capacity for 1 worker (combined weight of person, tools, clothing, etc.)

California Residents - Proposition 65 Warning

Prod. No. Mod. No. Product Name Application
V8221111 CP-10011-1 Permanent Anchorage with 1/2" (13mm) Hole Permanent
V8221112 CP-10011-2 Permanent Anchorage with 5/8" (16mm) Hole Permanent
V8221113 CP-10011-3 Permanent Anchorage with 3/4" (19mm) Hole Permanent
V8224111 AC-9450-DPLTF D-Ring Plate w/ D-Ring & Fasteners Permanent
V8229001 RB-9701 Single-Use Roof Bracket Temporary
V8229000 RB-9800 Reusable Roof Anchor Bracket Temporary
V829104 RB-9900 Stainless Steel Reusable Roof Anchor Bracket Temporary
V8221114 CP-10010-1 5K Concrete Swivel Anchor with 5/8" (16mm) Sleeve Anchor Permanent
V8221115 CP-10010-2 5K Steel Anchor with 1/2" x4" (13mm x 102mm) G8 Steel Bold Lock Washer and Lock Nut Permanent